B-AMP Bergantino Owner's Manual - page 22
21
Installation and Maintenance
Installation: To ensure proper operation and to avoid potential safety hazards, place the unit
on a firm, level surface.
Make certain that proper space is provided for ventilation. Never block the fan or the fan vent
holes on the side of the amplifier. If the amplifier will be installed in a rack or other enclosed
area, make sure that there is sufficient air movement within the enclosure to allow proper
cooling. Consult your dealer or Bergantino Audio Systems for more information if needed.
Avoid installation in extremely hot or cold locations, and areas that are exposed to direct
sunlight, or near heating equipment.
Moving the Unit: Before moving the unit, be certain to disconnect any interconnection cords
with other components, and make sure that you disconnect the unit from the AC outlet.
Cleaning: When the unit gets dirty, clean only with a dry cloth. Never use benzene, thinner,
alcohol, or other volatile cleaning agents. Do not use abrasive cleaners, as they may damage
the finish of metal parts. Avoid spraying insecticides near the unit.
Maintenance: Your new amplifier is rugged. It was built to give you years of trouble-free
operation, if it is operated in accordance with the instructions contained in this manual. The
only maintenance required is cleaning. If you are going to move your amplifier around
frequently, we recommend a travel case to protect it from scratches and road wear. Do not use
excessive force in handling control buttons, switches and controls. Do not use solvents such
as benzene or paint thinner to clean the unit. Wipe off the exterior with soft cloth.
To avoid damaging your speakers and other playback equipment, turn off the power of all
related equipment before making any connections.
No user serviceable parts inside. Refer service to qualified personnel. Always unplug AC
power before removing chassis. EXPORT MODELS: Make certain grounding conforms to local
standards. Always insure that amplifier is properly grounded. When replacing fuse, use only
same type and rating.
READ AND FOLLOW INSTRUCTIONS OF PROPER USAGE.