B-AMP Bergantino Owner's Manual - Specifications
22
Specifications
B
|
AMP Specifications:
Output Power:(User selectable in Program Mode)
700Watts @ 4-Ohm
800Watts @ 2.67-Ohm
800Watts @ 2-Ohm
Maximum Input Levels:
Main Input: 1Vrms (post gain control)
Aux. Input: 2Vrms
Effects Return: 1Vrms
Input/Output Impedances:
Input Impedance
1M Ohm
Aux. input Impedance
20k Ohm
Send output Impedance 600 Ohm
Return input Impedance 20k Ohm
Line Output Impedance
600 Ohm
DI Output Impedance
600 Ohm
Tone Controls (Peaking Type):
BASS: +/- 9dB Variable from 40Hz to 120Hz
LMID: +/- 9dB Variable from 150Hz to 800Hz
HMID: +/- 9dB Variable from 800Hz to 3kHz
TRBL: +/- 9dB Variable from 3kHz to 9kHz
Filters:
Variable High Pass Filter (VHPF): Variable from 30Hz to 80Hz in 2Hz increments.
Variable Feedback Filter (VFBF): Adjustable from off (0dB) to -6dB to -12dB in 1 dB
increments. Frequency range from 40Hz to 196Hz (E1- G3) in half step increments.
Bright Filter: Adjustable +3dB to +12dB in 1dB increments. Variable from 2kHz to 10kHz in
500Hz increments.
Cooling: micro-controlled low noise fan
Amplifier Protection: Full short circuit and thermal protection.
Dimensions (HxWxD): 10.5 W x 8.375”D x 3.75”H
Weight: 6.5 lbs.
Power Requirements:
100VAC-240VAC 50/60Hz
6.3 Amps (Internal T6.3A/250V fuse)
Maximum power consumption: 700 Watts