Baseline 225 Manual - General Conditions of Use
11
Power …………………………………………………………………………………….... 250W
Balancing speed…………………………………………………………………………. 150 rpm
Average spin time(with 5*14”wheel) ……………………………………………………… 7 sec
Shaft diameter…………………………………………………………………………….. 40mm
Tire shop temperature……………………………………………… 32 to 131 degrees F (0-50℃)
Machine dimensions (pic.4b):
Width with wheel cover……………………………………. 42.9 inches (1090mm)
Depth with wheel cover closed……………………………… 38.6 inches (980mm)
Depth with wheel cover open…………………………….… 37.4 inches (950mm)
Height with wheel cover closed…………………………… 49.6 inches (1260mm)
Height with wheel cover open……………………………. 62.2 inches (1580mm)
Programming parameters:
Rim width…………………………………………………… from 1.5 to 20 inches
Rim diameter…………………………………………………. from 8 to 23 inches
Max.wheel/machine distance………………………………… 6.7 inches (170mm)
Max.wheel width(with guard) ……………………………… 11.4 inches (290mm)
Max.wheel diameter (with guard) …………………………. 35.4 inches (900 mm)
Max.wheel weight…………………………………………………143.3 lbs. (65kg)
Shipping weight (without accessories) ………………………………… 251.3 lbs. (114kg)
Noise level when running………………………………………………… …
General conditions of use
The balancers described in this manual must be used exclusively to measure the entity and position
of unbalances on motor vehicle wheels, within the limits specified in the “Technical Brief”.
Furthermore, versions with motor must be lowered during the spin operation.
Attention
Any use of the machine other than the described use is to be considered as improper and
unreasonable.
Warning
It is forbidden to start the machine without the wheelJXDUG.
Attention
Get to know your machine: the best way to prevent accidents and get the best performance out
of the machine is to ensure that all the operators know how it works.
Learn the function and location all the commands.