Baseline 225 Manual - Display Messages
25
Select a wheel of average size and weight,(preferably with a limited unbalance), and fit to the
shaft.
Enter the correct geometrical data for the wheel.
Press the keys until the CAL program indicator lights up.
Press twice
to confirm selection of the program.
The machine is now ready to carry out second sensitivity calibration and will signal this with
the message “CA.2”.
Follow all the steps outlined above for first sensitivity calibration.
Display messages
The machine can recognize a certain number of incorrect operation and will signal them with
appropriate messages on the displays.
Error display
Er1 CAL Error in first sensivity calibration.
The first sensivity calibration procedure should be done.
Er2 CAL Error in second sensivity calibration.
Second sensivity calibration should be done.
Er3 CAL Calibration has been done without using the 100g standard weight.
Repeat calibration with the weight.
Er4 CAL First sensivity calibration has been done with a tire with a too high unbalance
Balance the wheel (or at least reduce its unbalance) and repeat calibration.
Er5 CAL Gauge calibration error.
Carry out gauge calibration.
Err 7 The machine cannot give the data asked for. Do a spin and repeat the request.
Err 10 Internal distance gauge not in rest position (completely in) when the machine is turned
on. Turn off the machine, return the gauge to its correct position and turn on again.
Potentiometer malfunction. Press the
key to disable the gauges and enter the data
from the keyboard.
Err 11 Diameter potentiometer malfunction. Press the
key to disable the gauges and enter
the data from the keyboard.
Contact technical assistance for help.
Err 20 Gauges not in correct position during calibration.
Move them to the correct position and repeat calibration.
Alu Err Incorrect wheel data have been input for an aluminium wheel balancing program (ALU).
Correct the data.
OPT Err Error made during the OPT procedure (optimization). Repeat from the beginning.
Cr Err Spin made with wheel guard up.