Baseline 225 Manual - Warning
9
Warning
A good ground connection is essential for the correct functioning of the machine,
NEVER connect the machine ground wire to a gas pipe, water pipe, telephone cable or other
unsuitable objects.
Safety regulations
Warning
Failure to observe these instructions and the relative danger warnings can cause serious injury
to the operator and others. Do not power up the machine before you have read and understood
all the danger/warning/attention notices in this manual.
This machine must be used only by qualified and authorized personnel. A qualified operator is
construed as a person who has read and understood the manufacturer‟s instructions, is suitably
trained, and is conversant with safety and adjustment procedures to be adhered to during operations.
Operators are expressly forbidden form using the machine under the influence of alcohol or drugs
capable of affecting physical and mental capacity. However, in the case of drugs prescribed by a
qualified physician without contraindications, the operator may be allowed to use the machine. The
following conditions are essential:
The operator must be able to read and understand the contents of this manual;
Make sure the operator has a thorough knowledge of the capabilities and characteristics of this
machine;
Keep unauthorized persons well clear of the area of operations;
Make sure that the machine has been installed in compliance with established legislation and
standards;
Make sure that all machine operators are suitable trained, that they are capable of using the
machine correctly and that they are adequately supervised during their work;
Do not touch power lines or the inside of electric motors or other electrical equipment until the
power has been disconnected and locked out.
Read this manual carefully and learn how to use the machine correctly and safely;
Always keep this user manual in a place where it can be readily consulted when working with
the machine and consult it whenever you are in need of confirmation or explanations.
Warning
Do not remove or deface the safety Danger, Warning or Instruction decals. Replace any
missing or illegible Danger, Warning or Instruction decals.
When using and carrying out maintenance on the machine observe the unified industrial
accident prevention regulations for high voltage industrial equipment and rotating machinery.