Cabletron Systems SmartSTACK ELS10-27TX Supplement Manual - 2.3.2  Lcm Command Syntax

Enhancements to LCM Commands

2-3

2.3.2  LCM Command Syntax

The following is a subset of LCM commands and syntax:

switch

[802.1d | 802.1Q]

cut[-through] | store[-and-forward]

[back[pressure] {on | off}]

enable

[PORT-RANGE [RIP] [TransmitPacing] [Address_Limit]]

port

[PORT-RANGE [speed {auto | 10[Mbps] | 100[Mbps]}]

[vlan {name |VLAN-ID}] (The default VLAN ID for that port.)

[GVRP {On | off}]

[access {add | del[ete]}]]

reboot

[SECONDS [down[load]] | off]

[par[ameters] PATH [IP-ADDR [GATEWAY-ADDR]]]

route

[add | del GATEWAY-ADDR]

[display [IPADDR]]

vlan

[add PORT-RANGE NAME VLAN-ID [IP-ADDR] [MASK]]

[del[ete] PORT_RANGE NAME VLAN-ID]

[res[trict] {add | de[lete]} PORT-RANGE VLAN-ID]

trunk

[add PORT-RANGE] 

[del[ete] PORT-RANGE]

workgroup

[NAME [{del[ete] | PORT_RANGE [INFO]]}]