Cabletron Systems SmartSTACK ELS10-27TX Supplement Manual - 3.4 The Filter Gvrp Table

3-6

Configuring VLANs Using SNMP

3.4 THE FILTER GVRP TABLE

The Filter GVRP Table can be used to inhibit VLANs from being learned via 

GVRP. It can also be used to inhibit a user from accidentally configuring a port 

on a VLAN they do not want. 

In the other tables, there are several local variables associated with the Filter 

GVRP Table, such as index, the VLAN ID, the list of ports, the status, and 

establish.

In the other tables, valid entries are between 0 and 31. An index outside of this 

range allows read/write access to the local variables.

3.4.1  Modifying, Creating or Deleting a Filter GVRP Table 

Entry

To modify, create, or delete an entry in the Filter GVRP Table, proceed as 

follows:  

When a write to the status entry has completed, an attempt will be made to carry 

out the command.

Step

Action

1

Set the index outside its valid range.

2

Set the VLAN ID to the value desired.

3

Set the port variable to the value desired.

4

Set the establish variable to Create or Delete.

5

Set the index to the table entry you desire to modify.

6

Write any value to the status variable.