Cabletron Systems SmartSTACK ELS10-27TX Supplement Manual - 4.5 Egress Table

4-12

VLAN MIB Objects

4.5 Egress Table

4.5.1  Egress Table (VlanConfigEgressTable)

This table allows for the specifying of the default VLAN ID for a specific port. If 

NOT configured as an ‘Access’ port, then packets containing this VLAN ID will 

have the tag stripped on egress, if it matches the PVID. This will set the PVID for 

each port contained within the list.

els10-27VlanConfigEgressTable     OBJECT-TYPE

SYNTAX SEQUENCE OF Els10-27VlanConfigEgressEntry

    ACCESS not-accessible

    STATUS mandatory

::= { els10-27VlanConfigVlan 5 }

The MIB OBJECT IDENTIFIER for accessing the VlanConfigEstablish is:

OID 1.3.6.1.4.1.97.9.20.6.5

4.5.2  Egress Entry (VlanConfigEgressEntry)

Allows for configuration of specific Egress entries. Although this is configured 

as a table, there is only a single instance. Entries should be referenced as simple 

variables.

els10-27VlanConfigEgressEntry    OBJECT-TYPE

    SYNTAX Els10-27VlanConfigEgressEntry

    ACCESS not-accessible

    STATUS mandatory

INDEX { els10-27VlanEgressVID }

::= { els10-27VlanConfigEgressTable 1 }

The MIB OBJECT IDENTIFIER for accessing the VlanConfigEstablish is:

OID 1.3.6.1.4.1.97.9.20.6.5.1