Cabletron Systems SmartSTACK ELS10-27TX Supplement Manual - Chapter 4
4-1
CHAPTER 4
VLAN MIB OBJECTS
4.1 OVERVIEW
This chapter describes the MIB objects that relate to configuring 802.1Q VLANs.
The MIB system groups described alphabetically in this chapter are as follows:
•
Bridge Configuration
•
Configuration Entries
•
Device Entries
•
Egress Table
•
Filter GVRP
•
Static MAC Address Entries
For procedures describing how to configure VLANs, refer to Chapter 3,
Configuring VLANs Using SNMP.
4.2 BRIDGE CONFIGURATION
The els10-27VlanBridgeConfig group manages the overall configuration of the
bridge’s VLAN resources.
The implementation of this group is MANDATORY.
The OBJECT-TYPE is from RFC-1212.
4.2.1 VLAN Version Number
Specifies the version of IEEE 802.1Q VLAN that has been implemented. A value
of 1 will be returned.
els10-27VlanVersionNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { els10-27VlanBridgeConfig 1 }
The MIB OBJECT IDENTIFIER for accessing the VlanVersionNumber is:
OID 1.3.6.1.4.1.97.9.20.1