CalAmp Fusion User Manual - page 107
Other manuals for Fusion:
Quick Start Manual
Manual is about: HIGH-PERFORMANCE MULTI-BAND LTE ROUTER
of
123
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 101
Figure 77 Simplified illustration of a typical network setup for OTA firmware upgrades
Alternatively, you may perform firmware upgrades via direct cable connection. Normally for a Fusion firmware upgrade
(and for cell module firmware upgrades with Fusion firmware version 1.1.7), only 12 V power to the Fusion and an
Ethernet cable connection are required, as shown in the following figure.
Figure 78 Fusion connected by Ethernet cable for Firmware upgrade