CalAmp Fusion User Manual - page 88
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 82
Store when
Specify when GPS information Is stored if, for example, a WWAN is out of coverage range.
Deliver messages every
Sets the time duration between consecutive messages. This can be set from one fifth of a second (0.2 s) to ten
seconds. Setting messages to be sent too often is not recommended.
Max reports to store
Sets the maximum number of reports to store. Only the most recent reports, up to the number of reports specified,
are stored. Older reports are discarded as new reports are created. This can be set from 3 to 1800. Setting the
number to save too many reports is not recommended.
3.13 MAINTENANCE
This section provides information you should have when contacting CalAmp Customer Service. In addition, it allows you
to update the firmware when updates become available, and, if directed to, to modify fundamental hardware
configuration parameters.
Select Maintenance from the main navigation menu to navigate to the Maintenance page.
3.13.1 STATUS
Figure 63 Maintenance – Status
Firmware
This is the complete identifier of the firmware currently running in the Fusion.
Catalog Number
The catalog number indicates which optional modules are installed in the Fusion.
Serial Number
The serial number of the Fusion router. The serial number is also printed on the label affixed to the bottom of the
Fusion enclosure.