CalAmp Fusion User Manual - page 74
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 68
RADIUS Configuration Server #1, #2
IP
The IP address of the RADIUS server.
Port
The port of the server.
Secret
Sets the secret to use with the RADIUS server.
Confirm Secret
Re-type the Server Secret to confirm the correct spelling.
Click Save to keep the currently-displayed value for each parameter. Once you have clicked Save, Cancel cannot be
used to return to previous settings. Click Cancel to abort changes and redisplay the last-saved parameters for this page.
3.10.4 SECURITY POLICY
Security policy allows enabling or disabling remote (over-the-air, OTA) configuration of the Fusion router via HTTP,
HTTPS, SNMP and Telnet. When a protocol is enabled, you may specify the port on which that protocol will be used.
Figure 53 Security – Security Policy
HTTP, Port
Enable or disable Hypertext Transfer Protocol. A well-known port for HTTP is port 80.
HTTPS, Port
Enable or disable HTTP Secure. A well-known port for HTTPS is port 443.
SNMP, Port
Enable or disable Simple Network Management Protocol. A well-known port for SNMP is port 161.
Telnet, Port
Enable or disable Telnet. A well-known port for Telnet is port 23.
When you have finished making configuration changes in this tab, click Save to save and apply the new settings or click
Cancel to clear changes.