CalAmp Fusion User Manual - page 20
Other manuals for Fusion:
Quick Start Manual
Manual is about: HIGH-PERFORMANCE MULTI-BAND LTE ROUTER
of
123
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 14
In the Provider #1 section, if Provider #1 is not already enabled click Enabled and in the same section, click Save to
enable Provider #1.
Leave APN, User, and Password blank unless you have received specific values from your carrier. For most cases,
Authentication should remain set as Any.
It may take several minutes to establish the connection after it has been enabled for the first time. Verify the
connection is active by clicking the Status tab. See the following figure.
Figure 10 WWAN0 Status tab showing LTE Link connected