CalAmp Fusion User Manual - page 36
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 30
Configuration
Interface
Selecting Enabled will enable the Wireless interface. Selecting Disabled will disable it.
Wireless Configuration
SSID
The SSID is the name of the wireless local network. Devices connecting to the Fusion WiFi access will identify the
Access Point by this SSID.
Channel
Select the WiFi channel the module will transmit on. If there are other WiFi devices in the area the Fusion should be
set to a different channel than the other access points. Note: If you are configuring the Fusion WiFi interface as both
a client and an Access Point, because both use the same WiFi radio, the client will be restricted to the channel you
select and therefore will only connect to other Access Points that use this channel, and will not scan for Access
Points using any other channels.
Authentication
Select authentication method. Options are Shared; WPA-PSK, WPA2-PSK, WPA-Enterprise and WPA2-Enterprise.
WPA2-PSK or WPA2-Enterprise is recommended if security is required.
Encryption
Select the encryption method. Options are None, WEP, TKIP, or CCMP. Depending on the authentication method
selected, some options will not be available here.
WEP Key Length
Available only if the WEP option is selected for encryption. Choose 64 or 128 bit key.
WEP Key Type
Available only if the WEP option is selected for encryption.
WEP Key Index
Available only if the WEP option is selected for encryption. Enter the encryption key.
RADIUS Configuration Server #1, Server #2
IP
The IP address of the RADIUS server.
Port
The port number of the server.
Secret
Sets the shared Secret to use with the server.
Confirm Secret
Re-type the server shared Secret to confirm.