Can-Am DS250 Operator's Manual - Vehicle Care
VEHICLE CARE
Post-Operation Care
When the vehicle is used in a salt wa-
ter environment, rinsing the vehicle
with fresh water is necessary to pre-
serve the vehicle and its components.
Lubrication of metal parts is highly rec-
ommended. Use XPS LUBE (P/N 293
600 016) or an equivalent. This must
be performed at the end of each oper-
ating day.
When the vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and
its components and to keep lights
clean.See
VEHICLE CLEANING AND
PROTECTION
.
Vehicle Cleaning and
Protection
NOTICE
Wash vehicle with warm
water and soap. Never use a high
pressure washer to clean the vehicle
USE LOW PRESSURE ONLY (such as
a garden hose). The high pressure
can cause electrical or mechanical
damage.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body parts
using warm water and a mild deter-
gent. Apply a non-abrasive wax.
NOTICE
Never clean plastic parts
with a strong detergent, de-greasing
agent, paint thinner, acetone, etc.
While reading this Operator’s Guide, remember that:
WARNING
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
______________
111