Canon ImageCLASS 2300 Sending Manual - Specifying Mail Basic Items
Specifying Mail Basic Items
3-2
Setting Up a Mail Account
3
Specifying Mail Basic Items
This section describes procedures for specifying I-Fax transmitting and receiving
conditions.
You can specify the following items in MAIL USER SETTINGS:
Item
Description
Setting
01 SMTP SERVER
Register a SMTP server address.
02 POP3 SERVER
Register a POP3 server address.
03 EMAIL RX PROTOCOL Specify a reception protocol.
'POP3*', 'SMTP'
04 CHECK INTERVAL
Specifying a checking interval (in
minutes) of POP3 mail.
0-60
0*
05 RETRY
Specifying the number of retries to
reconnect to the network after
failure.
0-5
2*
06 RETRY INTERVAL
Specifying a retry interval (in
minutes) to reconnect to the
network after failure.
1-60
2*
07 TIME ZONE SETTING
Specifying the time zone for the
machine.
08 PORT NO.
Specifying a connection port
number of each item.
00001-65535
25* (SMTP)
110* (POP3)
09 MAX. RX DATA SIZE
Specifying the maximum reception
data size.
0-9999
1000*
10 TX MODE
Specifying the I-Fax transmission
mode.
'SIMPLE MODE*',
'E-MAIL MODE'
11 RX TEXT PRINT
Specifying if message text is to be
printed when received mail has a
text message.
'ON',
'AUTO*',
'OFF'
12 LARGE MAIL
Specifying whether mail is to be
left on a server when it is larger
than the size specified in the
'LEAVE ON SERVER*',
'ERASE FROM
SERVER'
13 ERROR MAIL
Specifying if error mail is to be left
on the server.
'LEAVE ON SERVER*',
'ERASE FROM
SERVER'