D-Link DSL-504 User Manual - page 18
DSL-504 ADSL Router User’s Guide
Configuration,Port Redirection, Advanced Filter/Firewall, Connection
Type, Line Condition, User Name and Password, Save Changes, Update
Firmware and Summary. The various management menus are explained
below.
After logging in, it will automatically show the default settings. If you need to
make changes to the configuration, please ask your service provider for correct
settings.
PPPoE Configuration
The PPPoE is another connection method used by the Router is Point-to-Point-
Protocol over Ethernet (PPPoE) as defined in RFC 2516. Use the PPPoE
Configuration window to define the PVC by configuring the VPI and VCI values
given to you by your DSL service provider. PPP also allows you to use the
security protocols PAP or CHAP to help protect your network from unwanted
intruders. This window is used to assign the user name and password used to
access your network or server. When you have set the correct VPI and VCI and
entered the user name and password, click the Connect button to establish the
ADSL connection to your ISP’s network. The window is also used to terminate
the Router’s ADSL connection and change connection methods.
If you wish to change the connection method (to Bridged Ethernet over IP or
PPPoA), please read the section on Connection Method later in this chapter.
To bring up the PPPoE Configuration window, click on the PPPoE Configuration
menu button and the following screen will appear:
12