D-Link DSL-504 User Manual - page 44
DSL-504 ADSL Router User’s Guide
C
DSL-504 Firmware Upgrade Utility
You can update system firmware using the DSL-504 Firmware Upgrade Utility.
To upgrade the Router’s firmware you must have installed this software on the
PC you wish to use for this purpose. Install the utility by clicking the file named
setup.exe located on the Installation CD-ROM. It will be installed automatically.
It is recommended that the PC be directly connected to the Router using a
crossed cable, however you may upgrade it through the LAN from a remote host.
You also need to download the latest firmware version file from the D-Link web
site to the PC on which you will use the Upgrade Utility. Instructions for
downloading the firmware are located on the D-Link web site at
www.dlink.com
.
To launch the DSL-504 Firmware Upgrade Utility, click on the icon. Allow a few
moments for the software to discover the Router on the network. After the
discovery phase the following window will appear. You will see all the DSL-504
Routers on your network. You can identify individual devices by either its IP
address or its MAC address. Select the device you wish to upgrade by double
clicking on it.
38