D-Link DSL-504 User Manual - page 9
DSL-504 ADSL Router User’s Guide
Static Routing
This allows you to select a data path to a particular network destination that will
remain in the routing table and never “age out”. This enables you to route IP
traffic to a specific destination within your LAN (for example to a another router
or a server) or outside your network (to an ISP defined default gateway for
instance).
Default Routing
This allows you to choose a default path for incoming data packets for which the
destination address is unknown. This is particularly useful when the Router
functions as the sole connection to the Internet.
ATM (Asynchronous Transfer Mode)
The DSL-504 supports Bridged Ethernet over ATM, IP over ATM and PPP over
ATM. The Router can support up to eight Virtual Circuit Connections (VCCs).
Precise ATM Traffic Shaping
Traffic shaping is a method of controlling the flow rate of ATM data cells. It
functions to establish the Quality of Service for ATM data transfer.
G.hs (Auto-handshake)
The Router can automatically choose either the G.lite or G.dmt ADSL connection
standards.
High Performance
Very high rates of data transfer are possible with the Router. Up to 8 Mbps
downstream bit rate using G.dmt.
Full Network Management
The DSL-504 incorporates SNMP (Simple Network Management Protocol)
support and menu-driven network management via an RS-232 or Telnet
connection.
Telnet Connection
The Telnet feature enables a network manager to access the Router’s
management software remotely.
Easy Installation
The Router uses a web-based interface management system compatible with
most standard web browsers for easy installation and management.
3