EAW KF760 Rigging Manual - Kf760 Series Rigging Guide

KF760 Series Rigging Procedures  PRELIMINARY DRAFT -- 21 Aug 01

KF760 Series Rigging Procedures  PRELIMINARY DRAFT -- 21 Aug 01   Page 1 of 29

KF760 SERIES RIGGING GUIDE

1

RIGGING INFORMATION

1.1

FLY-BAR PHYSICAL FEATURES

1.2

 PALLETS

1.2.1

KF760 Pallet:

This pallet holds four KF760s tight-packed.  This provides a flat top surface for a double deck truck pack.

The caster positions are adjustable to fit different truck ramp widths.  Position the casters so they are the

same distances from the outside edges of the pallet.

The casters are secured to the pallet by a removable long connecting pin (see section 1.3).  Remove the

pin  and  repositioning  the  casters  as  needed.    Ensure  that  the  connecting  pins  extend  fully  through  the

holes and are fully locked.

The  casters  are  replaceable  allowing  use  of  different

types  of  casters  or  wheel  materials  or  wheel  sizes  as

needed for the particular conditions of use.

1.2.2

KF761 Pallet:

This pallet holds one KF761 face down for transport

The  caster  positions  are  adjustable  to  fit  different  truck

ramp widths.  Position the casters so they are the same distances from the outside edges of the pallet.

The casters are secured to the pallet by a removable long connecting pin (see section 1.3).  Remove the

pin  and  repositioning  the  casters  as  needed.    Ensure  that  the  connecting  pins  extend  fully  through  the

holes and are fully locked.

The casters are replaceable allowing use of different types of casters or wheel materials or wheel sizes

as needed for the particular conditions of use.

112"

32"

71"

37"