Eberspächer EasyStart Timer Installation Instructions Manual - Init
10 | VEhICLE hEATERs – TEChnICAL DOCuMEnTATIOn
3 sTARTup / COnFIguRATIOn
initial startup
For the initial startup, the following steps must
be carried out one after the other.
AppLyIng ThE OpERATIng VOLTAgE
The operating voltage is applied by inserting
the 5 A fuse into the fuse holder.
After applying the operating voltage InIT
appears in the display.
INIT
note: The timer checks which type of heater
is connected and configures the Menu bar
(automatic detection).
sETTIng ThE TIME
use the
or
button to set the hours.
06 : 00
press the
button to confirm the setting.
use the
or
button to set the minutes.
06 : 30
press the
button to confirm the setting.
sETTIng ThE WEEkDAy
use the
or
button to set the week-
day.
Mo.
press the
button to confirm the setting.
Then configure the Easystart Timer.
cOnfiguring the easystart timer
The system must be configured according to
its use.
please nOte!
These installation instructions describe
the standard configuration. For details of
enhanced configuration of the Easystart
Timer and special functions, you can view
and download the “special Functions and
Diagnosis” installation instructions from www.
eberspaecher-standheizung.com/download.