Eberspächer EasyStart Timer Installation Instructions Manual - 10:30
VEhICLE hEATERs – TEChnICAL DOCuMEnTATIOn | 11
Opening the Vehicle wOrkshOp menu
Display On, the start display appears.
use the
or
button to select the
symbol in the Menu bar.
10:30
Mo.
Confirm the sETTIngs menu item by pressing
the
button.
press the
LOngpREss button for longer
than 5 sec.; the Workshop menu is displayed.
selecting the settings fOr the stand-
ard cOnfiguratiOn
sELECTIng ThE TEMpERATuRE unITs – ITEM 2:
Default: °C
use the
or
button to select Item 2:
and confirm by pressing the
button.
use the
or
button to select the tem-
perature units °C or °F.
2: 18 °C
SERVICE
2: 64.4 °F
SERVICE
press the
button to confirm the selection.
ChAngIng ThE pREsET OpERATIng TIME –
ITEM 4.1:
Default: Water heater = 30 min. / Air heater =
continuous heating mode
use the
or
button to select Item 4.1:
and confirm by pressing the
button.
The
or
button can be used to set the
operating time.
Operating time setting range:
10 – 120 min. in 1 min. increments, continu-
ous heating mode is possible for air heaters.
From the 120th min. the operating time
can be extended in 5 min. increments up to
720 min.
4.1: 240
SERVICE
press the
button to confirm the setting.
3 sTARTup / COnFIguRATIOn