Eberspächer EasyStart Timer Installation Instructions Manual - 5: Default
12 | VEhICLE hEATERs – TEChnICAL DOCuMEnTATIOn
REsETTIng TO As-DELIVERED COnDITIOn –
ITEM 5:
use the
or
button to select Item 5.
5: Default
SERVICE
press the
button to confirm the selection.
5: Default
SERVICE
press the
button to confirm the selection.
INIT
Following the automatic detection the cur-
rent time and the current weekday must be
entered.
Then the start display appears.
sETTIng ThE LAnguAgE – ITEM 8:
Default: DE
use the
or
button to select Item 8:
and confirm by pressing the
button.
use the
or
button to select the lan-
guage DE or En.
3 sTARTup / COnFIguRATIOn
8: DE
SERVICE
8: EN
SERVICE
press the
button to confirm the selection.
sELECT DEpARTuRE TIME OR sTART TIME –
ITEM 10:
Default: “Off” for departure time
use the
or
button to select Item 10:
and confirm by pressing the
button.
use the
or
“Off” button for the
departure time or “On” to select the start
time.
10: Off
SERVICE
Departure time
10: On
SERVICE
start time
press the
button to confirm the selection.
After confirming you must reset the system by
removing the 5 A fuse.