ECOVACS WINBOT Instruction Manual - page 77
Enjoy smarter life
ENG - 77
ENG
2. SAFETY INSTRUCTIONS
2.1 About this Instruction Manual
Before use of the product, please follow the basic safety precautions as follows:
• Please carefully read all contents of this Instruction Manual, and use the product in accordance
with its instructions.
• Place the Instruction Manual in a safe place to refer to questions on operation or possible
solution to problems you might encounter. Make sure all people who will use this product
know where the Instruction Manual is kept.
• Operation ofthe unit inconsistent with the enclosed instructions could possibly damage
the product and require repair outside of Warranty.
2.2 Winbot Power
• Your Winbot is powered through the adapter provided. You MUST
only use the power adapter that is sold with the unit. Should
a replacement become necessary, please call our service number
and have your model number and the number on the PC label
ready to give to the person so the correct adapter will be purchased
and sent to you.
• Please check and confirm the marked power supply voltage to
ensure the product is used under the condition of indicated voltage.
• The lithium battery in the Winbot is used to power the Pump motor
should your electric fail or the adapter cord become unplugged.
This is a Safety precaution so the unit will not loose suction and
fall from the window and cause damage. A warning will sound
every three (3) minutes until you turn the unit OFF and remove
from the window.
• While the unit is plugged in and being used to clean the window,
the lithium battery will be charging. You may also charge the lithium
battery when done using by placing the slide switch underthe
handle to the Charge position.
• lf the either power cord or power plug is found to be damaged,
do not use the product. Call our service number to find the nearest
Authorized Service Center or to order replacement parts.
• Do not excessively distort, twist or squeeze the power cord, nor
nip the power cord when the window is closed or place heavy
objects on the power cord.
• Do not let the power cord contact with the surfaces of hot objects
or sharp objects.
• Do not unplug the power plug from the socket by pulling the
power cord.
• Do not touch power plug or the machine with wet hands.
• Frequently clean the dust on the plug with dry cotton cloth.