EcoWater ECR 3500R20 Owner's Manual - page 14
14
MODIFYING ROLLING SCREENS
During normal softener operation, four status screens
are shown in sequence (See “Softener Status Screens”
on Page 9). When the softener’s electronic control is
first powered up, the default is to show all four. You
can turn on/off individual screens*:
1. From any of the rolling status screens, press the
SELECT (
) button to display the Main menu.
2. Press the DOWN (
) button to scroll through the
menu options until Basic settings is highlighted
(See Figure 39).
3. Press the SELECT (
) button to display the Basic
settings menu (See Figure 40).
FIG. 39
FIG. 40
4. Press the DOWN (
) button to scroll through the
menu options until Rolling screens is highlighted.
5. Press the SELECT (
) button to display the Rolling
screens menu (See Figure 41).
FIG. 41
6. Press the DOWN (
) or UP () buttons to scroll
through the list. Items with a black square next to
them will be displayed during normal operation.
7. To un-select a screen, make sure its name is high-
lighted in a box. Then press the SELECT (
) button.
The black square will disappear. Pressing SELECT
(
) again makes the black square reappear and re-
selects the highlighted item. At least one screen
must be selected/highlighted.
8. When selections are complete, exit this menu by
pressing the LEFT (
) button. The display will go
back to the Basic settings menu (Figure 40).
9. Press the LEFT (
) button twice to return to the
rolling status screens.
*
This does not include service reminders, errors, alerts or
Recharge status screens.
SETTING THE LANGUAGE
When the softener’s electronic control is first powered
up, a “wizard” screen prompts you to set the language
(See Page 8). Language is set independently on the
softener and remote (See Page 26 to set the remote’s
language). To change the softener’s language:
1. From any of the rolling status screens, press the
SELECT (
) button to display the Main menu.
2. Press the DOWN (
) button to scroll through the
menu options until User preferences is highlighted
(See Figure 42).
4. Make sure Language is highlighted.
5. Press the SELECT (
) button to display the
Language menu (See Figure 44).
FIG. 42
FIG. 43
3. Press the SELECT (
) button to display the User
preferences menu (See Figure 43).
FIG. 44
6. If the desired language already has a black dot next
to it (See Figure 44), go to Step 7. Otherwise, press
the DOWN (
) or UP () buttons to scroll to the
desired language, then press SELECT (
) to choose
it. The choices are: English, Spanish, French, Italian,
German, Dutch, Polish, Russian, Hungarian, Turkish,
Lithuanian, Greek or Romanian.
7. Press the SELECT (
) button. The display will go
back to the User preferences menu (Figure 43).
8. Press the LEFT (
) button twice to return to the
rolling status screens.
TO SET THE SOFTENER TO ENGLISH
IF ANOTHER LANGUAGE IS DISPLAYED:
From the rolling status screens, press SELECT (
).
Press DOWN (
) three times, then press SELECT
(
) twice. Press UP () to scroll to English at the
top of the list, then press SELECT (
) twice. Press
LEFT (
) twice to exit all menus.
ECOWATER
S Y S T E M S
Conditioner Operation