EDAN SONOTRAX Basic User Manual - 3.4 Switching On The Doppler
SONOTRAX Series Ultrasonic Pocket Doppler User Manual Operation
- 15 -
(3) Replacing the Probe
Remove the old probe:
Switch off the Doppler; hold the main unit with one hand; pinch the jacket of the mini USB
socket and pull it out with mild force; take out the probe.
CAUTION
Do not pull the probe cable directly.
Figure 3-6 Removing the probe
Replace it with a new probe:
Put the USB socket of new probe into the probe interface of the Doppler.
NOTE:
Place the temporarily unused probe carefully and avoid falling off, splash or stress, etc.
When the Doppler is not used for a long time, it’s recommended to connect the probe to
the Doppler and keep them safely in the package.
3.4 Switching on the Doppler
Press the POWER button on the front panel to switch on the Doppler.
3.5 Modes Setting
SONOTRAX Basic, SONOTRAX Basic A, SONOTRAX Pro, SONOTRAX II and
SONOTRAX II Pro have different modes available. Press the MODE button to switch to the
next mode.
After self testing, SONOTRAX Basic enters the previous mode in which the Doppler worked,
and other models automatically enters mode 1.