EDAN SONOTRAX Basic User Manual - 3.8 Fh Sound Recording By Pc
SONOTRAX Series Ultrasonic Pocket Doppler User Manual Operation
- 18 -
3.7 FH Sound Recording and Playing by Build-in Recorder
This function is only available with SONOTRAX Pro and SONOTRAX II Pro.
Recording:
Press the REC/PLAY button and hold for three seconds in mode 1, 2 or 3, the machine starts
recording, and RECORDING appears on the LCD. The longest record time depends on the
recording sampling frequency set in mode 5.
The machine stops recording and returns to the examining status when the time is over or when
you press the REC/PLAY button again.
Playing:
Press the REC/PLAY button in mode 1, 2 or 3 when the machine is not recording, PLAYING
appears on the LCD, and the machine plays the recorded signals.
The machine stops playing and returns to the examining status when the signal playing is
completed or when you press the REC/PLAY button again.
NOTE:
Only the last set of recorded fetal heart sounds is saved in the Doppler. It is cleared
when new sounds are recorded.
3.8 FH Sound Recording by PC
The signal of fetal heart sound can be transferred to a personal computer (PC) and recorded by
the sound recorder. You can play the recorded sound files, burn them into CDs or e-mail them to
whomever you want.
3.8.1 Recording Sounds
Insert one plug of the special line-in cable supplied by the manufacturer to the audio input socket
(the socket with the symbol “
”) of the PC, refer to figure 3-7. If the PC has no audio input
socket, insert the plug into the microphone socket (the socket with the symbol “
”).