- DL manuals
- Faroudja
- Processor
- DVP2200
- Installation And Operation Manual
Faroudja DVP2200 Installation And Operation Manual
Summary of DVP2200
Page 1
0 dvp2200 digital video processor installation and operations manual.
Page 2
1 product description 2 installation 4 inventory list 4 setup 6 operating instructions 8 remote control 9 rs232 commands 11 specifications 15 warranty 16 table of contents copyright © 1999 by faroudja laboratories inc. No part of this document may be copied, photocopied, reproduced, translated, or r...
Page 3
2 the faroudja dvp2200 video processor is the ideal solution for optimizing the growing selection of display devices that require high performance results. The unit is a precision video instrument used to convert ntsc or pal interlaced signals into high-resolution progressively scanned images . The ...
Page 4
3 the greatest benefit of the dvp2200 is the image quality, a result of a complex three stage process called picture plus™ technology. Stage 1 – color decoding: adaptive comb filter- cross color suppression - bandwidth expansion in order for the display to create an image, it must receive red, green...
Page 5
4 unpacking remove the dvp2200 unit from the shipping container and examine it for any signs of shipping damage or missing items (check inventory list below). All shipping materials should be saved if the unit is to be moved or returned for service. Installation the dvp2200 processor is designed to ...
Page 6
5 connections this page outlines how different sources and displays can be connected to the dvp2200. Because of the high performance of the dvp2200 it is very important to use the highest quality cables possible, for both input and output signals. Both the rgb bnc and the d15 monitor output connecti...
Page 7
6 setup setup offers specific functions that must be done when the unit is initially installed. Some user features are not available with some of the setup selections so this must be done first. To prevent accidental alteration of the setup parameters, setup can only be done from the front panel or ...
Page 8
7 screen shape the dvp2200 has a unique aspect ratio control to allow for maximum performance from a display device. For proper operation, the unit must be set to the type of screen being used. There are two types to choose from. 16:9 screens this setting should be used on crt projectors with 16:9 s...
Page 9
8 front panel controls 1. Power/standby: press to turn the unit on (green) or to standby (red) 2. Infrared sensor window 3. Function + /- : cycles up or down through the available control functions 4. Value +/- : adjusts the levels or changes settings of the function selected. 5. Factory preset: rec...
Page 10
9 storing user preset there are four custom presets for each input selection in both ntsc and pal sources for a total of 24 (the hdtv pass-through does not offer presets). Select store user preset on the menu by pressing the function buttons. Select a preset using the value key. Press the factory ke...
Page 11
10 to change aspect ratio press: repeat pressing will toggle through the different aspect ratios (if available). The aspect ratios can also be directly accessed by pressing the aspect button and then the keypad: 1 = anamorphic 2 = letterbox 3 = 4:3 contrast can be accessed by pressing: then adjust t...
Page 12
11 rs232 control connector: db-9 female baud rate: 9600 default, 8 bit, 1 stop bit and no parity (adjustable 600, 1200, 2400,4800, 19,200) pin configuration: pin 5 = ground pin 3 = rx pin 2 = tx all commands to the dvp2200 are sent using ascii text strings. Note: a command must start with the string...
Page 13
12 command description range notes ( * = factory default, % = must be a single command) a# aspect ratio % *1,2 or 3 1 = anamorphic 2 = letterbox 3 = 4:3 (note: not available if a 4:3 screen shape is selected in the setup menu) b### brightness 0 – 255 factory preset = 128 c### contrast 0 – 255 factor...
Page 14
13 command description range notes m# output format % 1 or 2 1 = selects rgb output format 2 = selects ycrcb output format n### noise reduction 0 – 15 factory preset = 10 on power on % ---- ---- off power off % ---- places the dvp2200 in standby mode. O## on screen display % off/on/0-255 setup the o...
Page 15
14 the ‘st’ command returns a text string of all the current settings so the user/host controller can verify the units status. This string is a fixed length so that if used in a controller type system, string parsing is made simpler. An example of the string is shown below: dvp2200:x,ntsc,p0,a1,b128...
Page 16
15 specifications dvp2200 inputs (interlaced) (ntsc/pal b, m, n) composite 1vpp s-video y - 700mv pp c -286mv pp component (ycrcb) y - 1vpp cr – 700mv pp cb – 700mv pp computer/hdtv d15f (progressive or interlaced) remote control "d9f" rs-232 ascii outputs (progressive) resolution 480p(ntsc) 576p(pa...
Page 17
16 limited warranty faroudja laboratories, inc. (“ faroudja” ) warrants that its products will be free of defects in workmanship and material and conform substantially to published specifications under normal use and service. This warranty is made to the first purchaser of the products and extends f...