Faroudja DVP2200 Installation And Operation Manual - page 10
9
Storing User Preset
There are four custom presets for each input
selection in both NTSC and PAL sources for a
total of 24 (The HDTV pass-through does not
offer presets). Select Store User Preset on the
menu by pressing the Function buttons. Select
a preset using the Value key. Press the Factory
key to store.
Remote Control Operation
The remote control is a multi-function smart
remote that can control up to eight sources
including the DVP2200. See the separate
remote manual for complete instructions. The
following instructions cover the operation of the
Faroudja product only.
In many cases there are three ways to control the
unit:
1. By toggling through the different Functions
and Values using the Keys.
2. By Direct Access + keys.
3. By Direct Access + 1, 2, 3 keys
To activate the control of the DVP2200 press:
To turn On press:
To select an Input press:
Each press toggles to the next input or press the
number pad while the OSD is visible for:
1. Composite Video
2. S-Video
3. Component Video
4. HDTV/Computer Pass-through
To select a User Preset press:
Repeated pressing will toggle through the four
User and one Factory presets.
The presets can also be directly accessed by
pressing the PRESET button and then the
keypad:
0 = Factory
1 = User Preset 1
2 = User Preset 2
3 = User Preset 3
4 = User Preset 4
The Presets store all picture adjustment
information plus Aspect Ratio. To Store the
settings press:
The OSD will display which preset is currently
selected. Select the desired preset to store the
information and press the Store key again.
FDJA
1
POWER
INPUT
CENTER
PRESET
SUR
STORE
ENTER
Operating Instructions