Faroudja DVP2200 Installation And Operation Manual - page 15
14
The ‘ST’ command returns a text string of all the current settings so the user/host controller can verify the
units status. This string is a fixed length so that if used in a controller type system, string parsing is made
simpler. An example of the string is shown below:
DVP2200:X,NTSC,P0,A1,B128,C175,K128,T128,D06,N10,M1,G0,W2,S1,I0,F1,OSD000
| | | | | | | | | | | | | | | | | |--OSD ###
| | | | | | | | | | | | | | | | | OSD OFF
| | | | | | | | | | | | | | | | | OSD ON
| | | | | | | | | | | | | | | | | ------F1 NTSC/PAL(1)
| | | | | | | | | | | | | | | | F2 PAL_N(2)
| | | | | | | | | | | | | | | | F3 PAL-M(3
| | | | | | | | | | | | | | | |----------SYNC NONINV(0)
| | | | | | | | | | | | | | | SYNC INV(1)
| | | | | | | | | | | | | | |--------------480P(1)
| | | | | | | | | | | | | | 600x800(2)
| | | | | | | | | | | | | |-------------------4x3(1)
| | | | | | | | | | | | | 16x9(2)
| | | | | | | | | | | | |------------------------SOG OFF(0)
| | | | | | | | | | | | SOG ON(1)
| | | | | | | | | | | |-----------------------------RGB(1)
| | | | | | | | | | | YPrPb(2)
| | | | | | | | | | |-----------------------------------NOISE RDCT##
| | | | | | | | | | -----------------------------------------DETAIL##
| | | | | | | | | ------------------------------------------------TINT###
| | | | | | | | -------------------------------------------------------COLOR###
| | | | | | | ---------------------------------------------------------------CONTRAST###
| | | | | |-----------------------------------------------------------------------BRIGHTNESS###
| | | | | --------------------------------------------------------------------------ANAMORPHIC(1)
| | | | LETTERBOX(2)
| | | | 4x3(3)
| | | |-------------------------------------------------------------------------------PRESET (0)
| | | PRESET (1)
| | | PRESET (2)
| | | PRESET (3)
| | | PRESET (4)
PRESET (5)*
| | | ------------------------------------------------------------------------------------NTSC
| | PAL
| | 525L
| | 625L
| | -----------------------------------------------------------------------------------------VIDEO(V)
| Y/C(Y)
| YCrCb(X)
| HDTV(H)
|-----------------------------------------------------------------------------------------------DVP2200:HEADER
* = Preset 5 on a return string indicates the unit is NOT in a stored preset.
RS232 Instructions