Faroudja DVP2200 Installation And Operation Manual - page 7
6
Setup
Setup offers specific Functions that must be done
when the unit is initially installed. Some user
features are not available with some of the Setup
selections so this must be done first. To prevent
accidental alteration of the setup parameters,
setup can only be done from the front panel or
with the RS232 interface.
Here are the Functions in the order they appear
in the menu. Press the Function keys
+
or
-
to toggle through the Functions. Press the Value
keys
+
or
-
to change selections and values.
Format:
Auto NTSC/PAL(B) – PAL(N) –PAL M
Output:
RGB –YPrPb
Sync
(Sync on Green, RGB output mode only):
On/Off
Scan Rate:
480p(576pPAL) – 800x600(NTSC/PAL)
Screen Shape
16:9
(Anamorphic)
– 4:3
Sync Select
(800x600 mode only):
Standard – Inverted
OSD
(On-Screen-Display):
On/Off
OSD Height
(OSD must be On. From bottom to top of screen)
0 – 244
Definitions
Format: This allows for use in countries that
operate on the different types of PAL video.
Output: Most displays require RGB signals.
Some newer HDTV sets require the YPrPb
format.
Sync: In the RGB mode Sync on Green can be
useful for RGB distribution. Sync on Green
should not be used with standard installations.
Scan Rate: Select the rate that optimizes the
display device. For CRT projectors, the
480p(576p for PAL) setting should be selected
for entry level Data-Grade projectors. Graphics-
Grade 7” and 8” CRT projectors should use the
800x600 setting.
For fixed panel displays (LCD, DLP) the 800x600
mode should be used (as long as the native
resolution exceeds 800x600).
Screen Shape: The DVP2200 has different
aspect ratio calculations depending on the type
of screen being used. The correct screen shape
needs to be set for proper operation. (See next
section)
Sync: The 800x600 standard scan rate(VESA
Specification) has a Positive TTL sync. Some
displays cannot handle this type of sync so this
setting inverts the sync to Negative.
OSD: The On-Screen-Display can be turned on
and off for more professional presentations.
OSD Height: The position of the OSD can be
adjusted for optimum viewing. The actual range
of control is affected by which Aspect Ratio is
selected.
Installation