Faroudja DVP2200 Installation And Operation Manual - page 11
10
To change Aspect Ratio press:
Repeat pressing will toggle through the different
Aspect Ratios (if available).
The Aspect Ratios can also be directly accessed
by pressing the ASPECT button and then the
keypad:
1 = Anamorphic
2 = Letterbox
3 = 4:3
Contrast can be accessed by pressing:
Then adjust the Values by pressing the
buttons. For direct access, press the
CONTRAST button, then enter the value on the
keypad such as 158.
Brightness can be accessed by pressing:
Then adjust the Values by pressing the
buttons. For direct access, press the BRIGHT
button, then enter the value on the keypad such
as 138.
Color can be accessed by pressing:
Then adjust the Values by pressing the
buttons. For direct access, press the COLOR
button, then enter the value on the keypad such
as 150.
Tint can be accessed by pressing:
Then adjust the Values by pressing the
buttons. For direct access, press the TINT
button, then enter the value on the keypad such
as 150.
Detail can be accessed by pressing:
Then adjust the Values by pressing the
buttons. For direct access, press the DETAIL
button, then enter the value on the keypad such
as 7.
Noise Reduction can be accessed by pressing:
Then adjust the Values by pressing the
buttons. For direct access, press the NOISE
RED button, then enter the value on the keypad
such as 5
ASPECT
MENU
CONTRAST
PIP
BRIGHT
PREV CH
COLOR
SWAP
TINT
M PIP
NOISE
PAUSE
Operating Instructions
DETAIL
AUD