Faroudja DVP2200 Installation And Operation Manual - page 8
7
Screen Shape
The DVP2200 has a unique Aspect Ratio control
to allow for maximum performance from a display
device. For proper operation, the unit must be
set to the type of screen being used. There are
two types to choose from.
16:9 Screens
This setting should be used on CRT projectors
with 16:9 screens.
The projector geometry must be set
for Anamorphic sources!
How it Works
With the projector set to the 800x600 setting, for
example, the image looks like this with both
Anamorphic and Letterbox sources:
With 4:3 sources, the image looks like this:
This is a very powerful feature and does not
require multiple projector memories.
4:3 Screens
This setting should be used with any fixed panel
display device (LCD, DLP, etc.) or CRT with a
4:3 Aspect Ratio screen.
With the projector set to the 800x600 setting, for
example, the image looks like this with Letterbox
sources:
And for 4:3 sources:
The complex Aspect Ratio algorithms operate
automatically. Enter the proper source type with
the remote control and the DVP2200 will
calculate the proper geometry.
Note: DVDs come in Anamorphic, Letterbox and
4:3. In most cases the DVD player must be set
for the proper type. See your DVD manual for
details.
Note: The Anamorphic Aspect Ratio is not
available with 4:3 screens.
600 Lines
600 Lines
600 Lines
Installation
600 Lines