Fastrax IV Instruction Manual - page 17

11 

Chapter 3 — Program and Operation 

3.1 Dome Camera Selection 

Before you program or operate a dome camera, you must select the dome camera by 

pressing the dome camera No. + CAM 

Example

: Pressing 1 , 0 and CAM key sequentially will select dome camera 10. The 

selected dome camera ID will be displayed on the LCD monitor of the keyboard controller.   

3.2 Accessing the On-Screen Menu Utility 

You can call up the On-screen menu utility on your monitor by pressing MENU key on the 

keyboard controller, the following On-screen menu utility will appear: 

3.3 How to control the On-Screen Menu Utility 

Function 

Button 

Call the On-screen menu utility

MENU 

Navigate through the menu items.

Joystick up or

 down 

Go into the sub-menu items. 

Zoom handle twist 

Change value. 

Enter the editing title mode.

Joystick left or right or 

Zoom handle twist 

Change value of angle

CTRL + Joystick 

Enter the changing angle mode. 

IRIS Open 

Exit the changing angle mode. 

IRIS Close 

Escape (EXIT)

ESC