Fastrax IV Instruction Manual - page 25

19 

3.5.2  Motion

You can detect moving objects in specified preset position. 

You can see the results by either “Bounding Box” or “Trace”. 

As a result of motion, screen will display the bounding box or trace.   

 (“Bounding box” means you can see a virtual rectangle on moving object. In prior of this, you 

make sure that you set “On” in display and Bounding box in OSD Setup. 

 “Trace” means you can see a trace on moving object. In prior of this, you make sure that you 

set “On” in display and Bounding box in OSD Setup.) 

Sensitivity           : Set the sensitivity step. 1-8 step, the lower number means the lower  

        sensitivity (dull). 

Object Size          : Set the min/max size.  

Exclusion Area    : Set the exclusion area.  

Follow steps as below to set the Motion Detection:  

1. Select the function in the event function. Scroll to Motion and push the Joystick to the 

right. 

2. Select the “Sensitivity” and Set the object size.. 

3. Select “Exclusion Area”. 

(Viewing image will be positioned to the selected preset automatically when user enter this 

Menu)