Fastrax IV Instruction Manual - page 41
35
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.
AUTO
Camera goes in to B&W mode at low light.
GLOBAL
Controlled by the keyboard.
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, “999” + ENTER will turn Off the NIGHT
SHOT mode and “888” + ENTER will turn On the NIGHT SHOT mode.
ON
B/W mode.
OFF
Color mode.
START TIME
Set time to change from “Color mode” to “B/W mode”
END TIME
Set time to change from “B/W” to “Color mode”
Note : Selecting the Night Shot to Auto mode will change AE mode to “AUTO”.
3.12.4 DIS (Digital Image Stabilization)
DIS USE
ON / OFF
Choose to enable or disable DIS
IMAGE SHOW
NONE / PIP / PDP
NONE
Only viewing DIS Active image.
PIP
View original image (small) and DIS active image (big) as picture in
picture.
PBP
View original image (left) and DIS active image (right) as picture in
picture.
Note : There might be malfunction of DIS for the following cases.
- The camera is operating under extremely low light condition.
- The object brightness is almost identical to the background luminance
- The object is moving very fast
-. The camera is unsteady due to improper installation
Note : DIS will be deactivated if the camera is operating under Event function or
PAN/TILT/ZOOM/FOCUS
commands
.