Fastrax IV Instruction Manual - page 26

20 

Exclusion Area:  

You can set inactive area of Motion detection on this Menu. 

To avoid false alarm, we recommend you to exclude areas like trees with swaying branches 

or street with walking people

. 

Set Area           : Locate the cursor on the “Set Area” and then twist Joystick and then move 

    Green grid to the position. Change the color of grid to disable Motion  

    Detection by twisting Joystick. Then disabled Grid will be changed to Yellow 

    color. (Default color of grid is Blue) 

Clear Area        : Locate the cursor on the “Clear Area” and then twist Joystick and then  

    move Green grid to the position. Change the color of grid to enable Motion 

    Detection by twisting Joystick. Then enabled grid will be changed to Blue 

    color. 

All Set     

: Select All grids and change to Motion Detection disabled grid.  

All Clear    

: Select All grids and change to Motion Detection enabled grid.  

Note : We recommend setting Exclusion Areas for certain zones with unwanted 

motion. (For example, swaying branches or leaves of tree, flickering monitor screen)