Fastrax IV Instruction Manual - page 53

47 

Note : When you use the panning range, we recommend using the flip mode to AUTO. When 

the flip mode is 90

°

, 100

°

, 110

°

 or 120

°

 and you moves over 90

°

 vertically, the panning range 

operates in opposite side. 

3.19  Origin Offset 

This feature is useful to align a new dome camera exactly the same as the previously 

installed dome camera. 

Dome camera’s origin set and all data initialize option do not overwrite offset values. Only the 

default set option in this menu will set the offset value to zero. This can be used to avoid 

ceiling obstructions. 

Enable: ON (Use Offset value of Origin) / OFF (Do not use Offset value of Origin)  

Pan Offset: Set on the viewing image of Pan Offset in Origin menu. 

Tilt Offset: Set on the viewing image of Tilt Offset in Origin menu.