Fastrax IV Instruction Manual - page 87

81 

2.2 CEILING MOUNT KIT 

1. Select a suitable mounting location  

and verify there is sufficient cable to  

connect with cables from the housing. 

2. Mark and drill mounting holes in the  

surface using the ceiling mount flange. 

3. Pull out cables required to connect 

 to the dome camera from the ceiling. 

4. Attach the ceiling mount bracket  

using screws routing cables through  

the locking nut.  

5. Tighten the housing with the pipe  

using the socket after routing cables  

through the pipe. 

6. Attach the housing's safety wire to  

the ceiling mount's M6x35 tapping  

screw. 

7. After connecting cables, fix the pipe  

to the ceiling mount using the locking  

nut.b 

8. Tighten set screws of the socket and  

locking nut with the supplied wrench. 

*

 Please refer to Parts List