Federal Signal Corporation AR2000-M Installation And Maintenance Manual - page 4
-3-
PRESET 2
AR2000-P
UNIVERSITY PARK, IL U.S.A.
CORPORATION
FEDERAL
SIGNAL
R
PRESET 1
PRESET 5
PRESET 4
PRESET 3
PRESET 7
PRESET 6
PRESET 8
POWER
290A4120-03
Figure 1-3.
Ifthecallerpressesthe6key,themessage
“RECORDMESSAGE,PRESS#KEYTOBROADCAST
YOURMESSAGE”promptsthecallertostartspeaking.
Themessagecanbeupto90secondslong.Iftheuser
exceeds 90 second duration, the message will not play
back.
Atanytimeduringthecall,thecallercanenterthe#
keyorhang-upthephonetoexit.Also,whenakeyinput
isnecessary,thecallerhas5secondstoenterakeyor
the system hangs up automatically.
Thepasswordcanbereturnedtothedefault
“12345678”byopeningthecoveroftheRouterand
settingswitchSW1position#4tothe“ON”positionfor
5 seconds with the power “ON”.
Defaultistoallzones.Phonereceivingisdisabled
duringmessageplayback;therefore,subsequentcalls
must wait for the current message to be completed
beforeanotherrecordingwilltakeplace.
Preset operation
Thepresetoptosareacombinationofedgeand
level-tripped.Ifthesystemseesanactiveedgeon
an opto, it will set the input and output relays for the
correspondingpreset.Therelayswillremainsetuntilthe
input goes away.
Setting a Preset:
Tosetapreset,selectthezonesdesiredfor
the preset by pressing and releasing the appropriate
zonebutton.TheLEDcorrespondingtothatzonewill
illuminate. Select the input source (Channel A or Channel
B)forthatpreset.Pressandholdtheappropriatepreset
buttonuntilitbeginstoflash.Thepresetisnowset.
Torecallapresetsimplyselectthepresetby
pressing and releasing the associated preset button.
1-2. CHASSIS DESCRIPTION.
TheModelAR2000-Misassembledinablack,
sprayedaluminum3-piecehousingapproximately17.5”
wideby14.25"deepby3.5"high.Itisintendedtobe
rackmountedinastandard19”rackmountcabinet.
Thehousingisheldtogetherwitheighteenscrews,
eight on the front panel, six on the rear panel and four
securing the top to the sides.
Themainprintedcircuitboardisattachedtothe
lower housing with seven screws. Separate wiring
harnesses connect the front and rear boards to the
mainprintedcircuitboard.Thefrontpanelswitchesare
designatedasCHA,CHB,ALLCALL,CANCELZONE1
throughZONE8andPRESET1throughPRESET8.
TheModelAR2000-Pisassembledinablack,
sprayedaluminum3-piecehousingapproximately17.5”
wideby10.125"deepby1.75"high.Itisintendedtobe
rackmountedinastandard19”rackmountcabinet.The
housing is held together with twelve screws, four on the
front panel, four on the rear panel and four securing the
toptothesides.Thefrontpanelswitchesaredesignated
asPRESET1throughPRESET8.
TheModelAR2000-Zisassembledinablack,
sprayedaluminum3-piecehousingapproximately17.5”
wideby10.125"deepby1.75"high.Itisintendedtobe
rackmountedinastandard19”rackmountcabinet.The
housing is held together with twelve screws, four on the
front panel, four on the rear panel and four securing the
toptothesides.Thefrontpanelswitchesaredesignated
asZONE1throughZONE8.
290A4120-04
Figure 1-4.