Ferimex E-4000 User Manual - page 13
The class subsystem
Class subsystem is given as a first paramter to commands add, del, set, show.
Syntax:
add cl[ass]
del cl[ass]
set cl[ass]
show cl[ass]
reload cl[ass]
help cl
First form adds a class, optionally with the given number. If not given, the number will
be assigned automatically. Second form deletes a class. Third form sets a class para-
meter. Fourth form displays class setting(s).
Example:
add cl office
Available
n[umber]
- class number. Could only be displayed.
na[me]
- class name
ena[ble]
- disabling |enabling of the class. disabled class will
disallow access of the corresponding client on interfa-
ces with access=listed.
ip
- ip addresses ranges of the class (n defaults to 1)
match
- allows additional IP matching criteria, like protocol,
port, tos.
Following params are known (! means the criterion is
negated):
proto=[!](all|tcp|udp|icmp),
sport|dport=[!]
tos=normal|min-cost|max-rel|max-thr|min-del
type=[!]
mac
- MAC address of the host represented by the class,
the format is: a1:b2:c3:d4:e5:f6
if
- interface the client is connected to. It is required if
access restrictions are set (e.g. set
resp. verify yes).
irate
- guaranteed input (download) rate. Unit is one of:
bit,kbit,mbit,bps,kbps,mbps, where bps means bytes
per s.
orate
- guaranteed output (upload) rate.
14
TRAFFIC MANAGER E-4000