Fiat 500 Abarth Owner's Handbook Manual - page 119

118

W

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

IINDEX

YOUR CAR

SAFETY DEVICES

CORRECT USE OF THE 

CAR

IN AN

EMERGENCY

MAIN BEAM HEADLIGHTS

To change the bulb, proceed as follows:

❒ remove the protecting rubber cap men-

tioned above;

❒ release the two bulb holding clips A-

fig. 25;

❒ remove the bulb and replace it;

❒ fit the new bulb, making the outline of

the metallic part coincide with the

grooves on the reflector, then hook

back the bulb holding clips;

❒ reinstall the rubber cap;

DIPPED BEAM HEADLIGHTS

To change the bulb, proceed as follows:

❒ remove the protecting rubber cap men-

tioned above;

❒ press the fastener A-fig. 24 and extract

the bulb holder;

❒ remove the snap-fitted bulb and replace

it;

❒ refit the cap locking it properly.

❒ reinstall the rubber cap;

fig. 24

F0S0053m

fig. 25

F0S0054m

Side

To change the bulb, proceed as follows:

❒ prise in the point indicated by the ar-

row, so as to compress the fixing clip

and extract the assembly B-fig. 23;

❒ turn the bulb holder counterclockwise,

remove the snap-fitted bulb and replace

it;

❒ reinstall the bulb holder into the lens,

then install the assembly B making sure

that the fixing clip has clicked.

fig. 23

F0S0138m

101-128 FIAT 500 GBdx  13-11-2007  13:56  Pagina 118