Fiat 500 Abarth Owner's Handbook Manual - page 25
24
SAFETY DEVICES
CORRECT USE OF THE
CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
YOUR CAR
Driver side and passenger side where
position memory is provided
To return the seat to its initial position,
slide the seat backward pushing the back-
rest until the seat locks (movement
d)
operate the lever D (movement
e) and
lift the backrest (movement
f) until you
hear it snapping in position.
WARNING Using the lever D before
locking the seat in the initial position caus-
es the loss of the seat initial position. In
that case, it is necessary to adjust the seat
position by means of the longitudinal ad-
justment fig. 17.
Passenger side where position
memory is not provided
To return the seat to its initial position,
slide the seat backward pushing the back-
rest to the desired position (movement
d); operate the lever D (movement e)
and lift the backrest (movement
f) until
you hear it snapping in position.
All adjustments must be
made with the car stationary.
WARNING
fig. 21
F0S0017m
REAR SEATS fig. 21
Backrest release
❒ For versions with joint seat, lift handles A
and B and guide the backrest onto the
cushion.
❒ For versions with separate seats, lift han-
dle A or B to release respectively the left
or right part of the backrest and guide the
backrest onto the cushion.
HEAD RESTRAINTS
FRONT fig. 22
Head restraints height can be adjusted as
follows.
❒ upward adjustment: raise the head re-
straint until you hear it click.
❒ Downward adjustment: press A and
lower the head restraint.
Perform these operations
only when the car is stationary
and the engine is not running.
Remember that the head restraints
should be adjusted to support the
back of your head and not your neck.
Only in this position do they exert
their protective action.
To optimise head restraint protective
action, adjust the backrest upright
and keep your head as close as
possible to the head restraint.
WARNING
023-045 FIAT 500 GBdx 6-02-2008 8:14 Pagina 24