Fiat 500 Abarth Owner's Handbook Manual - page 21

20

SAFETY DEVICES

CORRECT USE OF THE 

CAR

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

YOUR CAR

Note The “Service Schedule” requires the

car to be serviced every 30,000 km (or

18,000 mi); this indication will appear au-

tomatically with the key on MAR when

there are 2,000 km left (or equivalent dis-

tance in miles) and will be presented au-

tomatically every 200 km (or equivalent

distance in miles). The indications will ap-

pear more frequently where there are 200

km left. The indication will appear in kilo-

metres or miles according to the settings.

When the next scheduled service opera-

tion is approaching, the message “Service”

will appear on the display followed by the

number of kilometres or miles left when

the key is turned to MAR. Go to the Fi-

at Dealership where the “Scheduled Ser-

vice” operations will be performed and the

message will be reset.

Passenger bag 

Front passenger’s airbag and 

side bag activation/deactivation 

(where provided)

This function enables to activate/deacti-

vate the front passenger’s air bag. 

Proceed as follows:

– press button MENU 

ESC

and, after dis-

playing the message (Bag pass: Off) (to dis-

able) or (Bag pass: On) (to enable) press-

ing buttons 

+

and 

–

, press again button

MENU 

ESC

;

- the confirmation request message will be

displayed;

- press buttons 

+

or 

–

to select (Yes)

(confirming activation/deactivation) or

(No) (to abort);

- briefly press MENU 

ESC

to confirm set-

ting and go back to the menu screen or

press the button for long to go back to the

standard screen without storing settings.

Daylights (D.R.L.)

This function enables to activate/deacti-

vate the daylight light.

Proceed as follows to switch this function

on or off:

– briefly press button MENU 

ESC

to dis-

play the three sub-menus;

– briefly press button MENU 

ESC

: (On)

or (Off) will flash on the display (accord-

ing to previous setting);

– press button 

+

or 

–

for setting;

– briefly press button MENU 

ESC

to go

back to the menu screen or press the but-

ton for long to go back to the standard

screen without storing settings;

– hold MENU 

ESC

pressed to go back to

the standard screen or main menu accord-

ing to the points of the menu where you are

at.

Exit Menu

This is the last function that closes the cir-

cular setting cycle listed in the initial menu

screen.

Briefly press button MENU 

ESC

to go

back to the standard screen without stor-

ing settings.

Press button 

–

to return to the first menu

option (Speed Beep).

001-022 FIAT 500 GBdx  19-05-2008  9:11  Pagina 20