Fiat 500 Abarth Owner's Handbook Manual - page 16
15
SAFETY DEVICES
CORRECT USE OF THE
CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
YOUR CAR
To adjust the brightness, proceed as fol-
lows:
– briefly press button MENU
ESC
, the
previously set level will flash on the dis-
play;
– press button
+
or
–
to set the required
brightness level;
– briefly press button MENU
ESC
to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
Speed beep (Speed limit)
With this function it is possible to set the
car speed limit (km/h or mph); when this
limit is exceeded the driver is immediate-
ly alerted (see section “Warning lights and
messages”).
To set the speed limit, proceed as follows:
– briefly press button MENU
ESC
, the
display will show the message (Speed
Buzz);
– press button
+
or
–
to select speed lim-
it activation (On) or deactivation (Off);
– when the function is activated (On)
pressing buttons
+
or
–
select the speed
limit and press MENU
ESC
to confirm
selection.
Note Selection is possible between 30
and 200 km/h, or 20 and 125 mph de-
pending on the selected unit, see para-
graph “Unit of measure”. The setting will
increase/decrease by five units each time
button
+
/
–
is pressed. Hold button
+
/
–
pressed to increase/decrease the setting
rapidly. Complete the setting by briefly
pressing the button when you approach
the required setting.
– briefly press button MENU
ESC
to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
To cancel the setting, proceed as follows:
– briefly press button MENU
ESC
: (On)
will flash on the display;
– press button
–
: (Off) will flash on the dis-
play;
– briefly press button MENU
ESC
to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
001-022 FIAT 500 GBdx 19-05-2008 9:11 Pagina 15