Fiat 500 Abarth Owner's Handbook Manual - page 121

120

W

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

IINDEX

YOUR CAR

SAFETY DEVICES

CORRECT USE OF THE 

CAR

IN AN

EMERGENCY

IF AN INTERIOR LIGHT

BURNS OUT

For the type of bulb and power rating, see

“When needing to change a bulb”.

INSIDE CEILING LIGHT

To change the bulb, proceed as follows:

❒ using the screwdriver provided, extract

the ceiling light A-fig. 32 working in the

point indicated by the arrow;

NUMBER PLATE LIGHTS fig. 31

To replace the bulbs proceed as follows:

❒ work in the point shown by the arrow

and remove lens A;

❒ change the bulb releasing it from the

side contacts and making sure the new

bulb is correctly fastened between the

contacts;

❒ reinstall the lens.

fig. 30

F0S0059m

THIRD BRAKE LIGHT fig. 29-30

To change the bulb proceed as follows:

❒ remove the two guard caps and un-

screw the two fastening screws A;

❒ withdraw the assembly;

❒ disconnect the electric connector B;

❒ press the retaining device C and open

the bulb holder;

❒ remove the snap-fitted bulb to be re-

placed and replace it;

❒ close back the cap locking it properly.

❒ screw in the two fastening screws and

reinstall the guard caps;

fig. 29

F0S0058m

fig. 31

F0S0139m

101-128 FIAT 500 GBdx  13-11-2007  13:56  Pagina 120