Ganz ZC-PT336N-IR User manual - page 11
Manual is about: IR PTZ CAMERA
The World?s First 360 angl.Endless PAN/ TILT Motion
Auto LED Brightness Control by Distance Range
Auto LED Pulse Control by Distance Range
PAN/ TILT Torque Compensation (Step-Out Prevention)
of
39
as height.
C-2. Connect the Camera to Wall Mount Bracket with 4 pieces of M4 x 16 screws and Spring
Washer. (FIG.12)
Installation
C-3. Connect the Safety wire of the Camera to the Bracket. In order to avoid getting entangled in
the Camera, fasten the Safety wire to the bracket with Cable tie. (FIG.13)
C-4. When you want to connect the cables from the inside of wall, pass the cables through the wall.
When you want to connect the cables from the outside of wall, remove the hole cap from the side
of the bracket and pass the cables through the hole.
C-5. Install 4 pieces of Anchor bolt in the holes at the edge and tight enough with Nuts. (FIG. 13)