Ganz ZC-PT336N-IR User manual - page 8
Manual is about: IR PTZ CAMERA
The World?s First 360 angl.Endless PAN/ TILT Motion
Auto LED Brightness Control by Distance Range
Auto LED Pulse Control by Distance Range
PAN/ TILT Torque Compensation (Step-Out Prevention)
of
39
A-5. Install 4 pieces of Anchor bolt in the holes at the edge and tight enough with Nuts. (FIG.4)
A-6. Connect the cables referring to the page 8. (FIG.5)
Installation
B. Pole Stand
COMPONENTS
1. POLE STAND 1EA
6. SCREW M4 x 16 5EA
2. BOLT M10 x 45 4EA
7. SPRING WAHGER Ø4 5EA
3. NUT M10 4EA
8. WRENCH (3mm) 1EA
4. FLAT WASHER 4EA
9. MANUAL
5. SPRING WASHER Ø10 4EA
B-1. When you install IR-PTZ Camera on the pole, make 4 holes at edge with Ø13 in diameter and
37mm in depth. Make also a hole for the cables with about Ø30˜50 in diameter in the
bottom center of the bracket. (FIG.6)