Ganz ZC-PT336N-IR User manual - page 25
F-7. TOUR SET - SAVE
To save the memorized data and escape this page, move the joystick right or press the pan right
key when cursor is at SAVE.
F-8. TOUR SET - EXIT
To escape this page, move joystick to the right direction.
OSD Menu Setting
G. Privacy Set
8 Privacy masking zones can be set.
G-1. PRIVACY SET - PRIVACY NO.
Up to 8 privacy masking zones can be set.
G-2. PRIVACY SET - DISPLAY
Move the joystick right or left or press pan right / left to set ON in order to show the selectable
block in the center of the monitor. This block appears as a translucent square with blue color when
set ON. The default setting is OFF.
G-3. PRIVACY SET - ACTION (MOVE / ADJUST)
To set the blocking area, press FOCUS FAR button when MOVE MODE is displayed.
Then use the joystick or pan keys to the user defined area in order to set the blocking area.
Then press FOCUS FAR button again to escape from Move mode. To adjust the size of the
blocking area, move the joystick or use the pan keys when the cursor is on ACTION. After it has
changed to ADJUST MODE, press FOCUS FAR button in order to adjust the size of the blocking
area. The size of the blocking area can be adjusted by using joystick up / down or left / right or the
pan and tilt keys.
After adjusting the size of the blocking area, press FOCUS FAR button to escape the ADJUST
mode
•
ADJUST : You can change the masking size by using the joystick or pan keys.
•
MOVE : You can move the masking area by using the joystick or pan keys. (Default)
OSD Menu Setting