Ganz ZC-PT336N-IR User manual - page 26
G-4. PRIVACY SET - SAVE.
After setting the privacy masking zone, to save the data, move the joystick right or pan right key
when the cursor is on SAVE.
After saving the data, the cursor moves to PRIVACY NO.2 automatically to prepare for the next
privacy masking zone.
G-5. PRIVACY SET ‒ EXIT
To escape this page, move the joystick right.
H. Pattern Set
8 Programmable patterns are available with 16 characters of title.
After set the data to the each pattern #1 ˜ 8, 81 ˜ 88+preset buttons are working as pattern #1 ˜ 8.
H-1. PATTERN SET - PATT NO.
Up to 8 Programmable user-defined patterns are available.
H-2. PATTERN SET - PATT TITLE.
To set PATTERN TITLE move Joystick left / right or use the pan keys. Press ZOOM TELE button
moves to the next character from the left / right and ZOOM WIDE button moves to the next
character from the right / left. (Space displays when □ appears.)
The pattern title is not displayed on the monitor, but only for the reference of the user.
H-3. PATTERN SET - DATA FILL
To memorize a pattern, press FOCUS FAR button in order to start the process. The progress is
shown as % filled. Press FOCUS FAR button again in order to escape.
OSD Menu Setting
H-4. PATTERN SET - SAVE
To save the memorized pattern data, move the joystick right or press the pan right key when the
cursor is on SAVE. Then the cursor moves to the PATT NO.02 in order to prepare for the next
pattern.
H-5. PATTERN SET - EXIT
To escape this page, move the joystick right or press the pan right key.